Ip Netstream Export Version - H3C MSR 20-20 Command Reference Manual

2298 C 151: N
HAPTER ET
View
Parameter
Description
Related command:
Example

ip netstream export version

Syntax
View
Parameter
Description
S C C
TREAM ONFIGURATION OMMANDS
System view, NetStream aggregation view
interface-type interface-number: Specifies a source interface for NetStream UDP
packets by its type and number.
Use the
ip netstream export source interface
source interface for NetStream UDP packets.
Use the
undo ip netstream export source
configured source interface.
By default, the source interface is the interface from which statistics are exported.
Different source interfaces can be configured in different aggregation views.
ip netstream aggregation, ip netstream export destination.
# Configure the source interface for NetStream UDP packets as Ethernet 1/0.
<Sysname> system-view
[Sysname] ip netstream export source interface ethernet 1/0
ip netstream export version version-number [ origin-as | peer-as ]
undo ip netstream export version
System view
version-number: Version number for NetStream UDP packets. Currently, version 5
is supported.
origin-as: Sets the type of AS number recorded in NetStream cache entries to
origin.
peer-as: Sets the type of AS number recorded in NetStream cache entries to peer.
Use the
ip netstream export version
numbers to be recorded in NetStream cache entries and the version of NetStream
UDP packets.
Use the
undo ip netstream export version
By default, a single stream is sent in version 5 UDP packets and the AS option is
peer-as.
Note that the AS numbers for the source and destination IP addresses of a stream
are recorded in the statistics information. And each IP address corresponds with
two AS numbers (origin and peer), the system records the AS numbers according
to the AS option configured by users.
command to configure the
command to remove the
command to configure the type of AS
command to restore the default.