Dot1P-Priority - H3C S5120-SI Series Command Reference Manual

Examples
# View the statistics information of IGMP messages learned by IGMP snooping.
<Sysname> display igmp-snooping statistics
Received IGMP general queries:0.
Received IGMPv1 reports:0.
Received IGMPv2 reports:19.
Received IGMP leaves:0.
Received IGMPv2 specific queries:0.
Sent IGMPv2 specific queries:0.
Received IGMPv3 reports:1.
Received IGMPv3 reports with right and wrong records:0.
Received IGMPv3 specific queries:0.
Received IGMPv3 specific sg queries:0.
Sent IGMPv3 specific queries:0.
Sent IGMPv3 specific sg queries:0.
Received error IGMP messages:19.
Table 1-2 display igmp-snooping statistics command output description
general queries
specific queries
reports
leaves
reports with right and wrong records
specific sg query packet(s)
error IGMP messages

dot1p-priority

Syntax
dot1p-priority priority-number
undo dot1p-priority
View
IGMP-Snooping view
Default Level
2: System level
Parameters
priority-number: Specifies 802.1p precedence for IGMP messages, in the range of 0 to 7. The higher the
number, the higher the precedence.
Field Description
General query messages
Group-specific query messages
Report messages
Leave messages
Report messages with correct and incorrect records
Group-and-source-specific query message(s)
IGMP messages with errors
1-3