Ip Netstream Aggregation - H3C MSR 20-20 Command Reference Manual

2296 C 151: N
HAPTER ET
Parameter
Description
Example

ip netstream aggregation

Syntax
View
Parameter
Description
Related command:
S C C
TREAM ONFIGURATION OMMANDS
inbound: Enables NetStream statistics in the inbound direction of an interface.
outbound: Enables NetStream statistics in the outbound direction of an interface.
Use the
ip netstream
outbound direction of the interface.
Use the undo ip netstream
inbound or outbound direction of the interface.
By default, NetStream statistics is disabled in both directions of the interface.
# Enable NetStream statistics in the inbound direction of interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ip netstream inbound
ip netstream aggregation { as | destination-prefix | prefix | protocol-port
source-prefix }
System view
as: AS aggregation by combination of source AS number, destination AS number,
inbound interface index, and outbound interface index.
destination-prefix: Destination-prefix aggregation by destination AS number,
destination address mask length, destination prefix, and outbound interface index.
prefix: Source and destination prefix aggregation by combination of source AS
number, destination AS number, source address mask length, destination address
mask length, source prefix, destination prefix, inbound interface index, and
outbound interface index.
protocol-port: Protocol-port aggregation by combination of protocol number,
source port, and destination port.
source-prefix: Source-prefix aggregation by combination of source AS number,
source address mask length, source prefix, and inbound interface index.
Use the
ip netstream aggregation
view.
In NetStream aggregation view, you can enable or disable the aggregation mode,
set information about source interface, destination IP address and destination port
number for version 8 UDP packets.
enable, ip netstream export host, ip netstream export source.
command to enable NetStream statistics in the inbound or
command to disable Netstream statistics in the
command to enter NetStream aggregation