3
Line Rate Configuration Commands
Line Rate Configuration Commands
display qos lr interface
Syntax
display qos lr interface [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display qos lr interface command to view the line rate configuration information and
operational statistics on a specified interface or all the interfaces.
If no interface is specified, the line rate configuration information and operational statistics on all the
interfaces are displayed.
Examples
# Display the line rate configuration information and operational statistics on all the interfaces.
<Sysname> display qos lr interface
Interface: GigabitEthernet1/0/2
Direction: Inbound
CIR 1280 (kbps)
Direction: Outbound
CIR 2560 (kbps)
Interface: GigabitEthernet1/0/4
Direction: Inbound
CIR 1280 (kbps)
Direction: Outbound
CIR 2560 (kbps)
Table 3-1 display qos lr command output description
Interface
Field
3-1
Description
Interface type and interface number