Module Stop Control Register (Mstpcr) - Renesas Hitachi H8S/2194 Series Hardware Manual

20.2.3

Module Stop Control Register (MSTPCR)

7
Bit :
MSTP15
Initial value :
1
R/W : R/W
The MSTPCR consists of two 8-bit readable/writable registers that control module stop mode.
When the MSTP1 bit is set to 1, the 12-bit PWM and Servo circuit, stops their operation upon
completion of the bus cycle and transits to the module stop mode. For details, see section 4.5,
Module Stop Mode.
The MSTPCR is initialized to H'FFFF by a reset.
Bit 1: Module Stop (MSTP1)
This bit sets the module stop mode of the 12-bit PWM. This bit also controls the module stop
mode of the servo circuit.
MSTPCRL
Bit 1
MSTP1 Description
0 Module stop mode of the 12-bit PWM and servo circuit is released
1 Module stop mode of the 12-bit PWM and servo circuit is set
Rev. 2.0, 11/00, page 420 of 1037
MSTPCRH
6 5 4 3
MSTP14 MSTP13 MSTP12 MSTP11 MSTP10
1 1 1 1
R/W R/W R/W R/W R/W
2 1 0 7 6
MSTP9 MSTP8 MSTP7 MSTP6
1 1 1 1 1
R/W R/W R/W R/W
MSTPCRL
5 4 3 2 1
MSTP5 MSTP4 MSTP3 MSTP2 MSTP1
1 1 1 1 1
R/W R/W R/W R/W R/W
(Initial value)
0
MSTP0
1
R/W