Module Stop Control Register (Mstpcr) - Renesas Hitachi H8S/2194 Series Hardware Manual

Bit n
PMR0n Description
0 P0n/ANn functions as a general-purpose input port
1 P0n/ANn functions as an analog input channel
26.2.7

Module Stop Control Register (MSTPCR)

Bit : 7
MSTP15
Initial value : 1
R/W :
R/W
MSTPCR consists of 8-bit readable/writable registers and performs module stop mode control.
When the MSTP2 bit in MSTPCR is set to 1, A/D converter operation stops at the end of the bus
cycle and a transition is made to module stop mode. For details, see section 4.5, Module Stop
Mode.
MSTPCR is initialized to H'FFFF by a reset
Bit 2: Module Stop (MSTP2)
Specifies the A/D converter module stop mode.
MSTPCRL
Bit 2
MSTP2 Description
0 A/D converter module stop mode is cleared
1 A/D converter module stop mode is set
Rev. 2.0, 11/00, page 586 of 1037
MSTPCRH
6 5 4 3
MSTP14 MSTP13 MSTP12 MSTP11 MSTP10
1 1 1 1
R/W R/W R/W R/W R/W
2 1 0 7 6
MSTP9 MSTP8 MSTP7 MSTP6
1 1 1 1 1
R/W R/W R/W R/W
(Initial value)
MSTPCRL
5 4 3 2 1
MSTP5 MSTP4 MSTP3 MSTP2 MSTP1
1 1 1 1 1
R/W R/W R/W R/W R/W
(Initial value)
(n = 7 to 0)
0
MSTP0
1
R/W