Module Stop Control Register (Mstpcr) - Renesas Hitachi H8S/2194 Series Hardware Manual

16.2.9

Module Stop Control Register (MSTPCR)

Bit : 7
MSTP15
1
Initial value :
R/W
R/W :
The MSTPCR are 8-bit read/write twin registers which work to control the module stop mode.
When the MSTP11 bit is set to 1, the Timer R stops its operation at the ending point of the bus
cycle to shift to the module stop mode. For more information, see section 4.5, Module Stop
Mode.
When reset, the MSTPCR is initialized to H'FFFF.
Bit 3: Module Stop (MSTP11)
This bit works to designate the module stop mode for the Timer R.
MSTPCRH
Bit 3
MSTP11 Description
0 Cancels the module stop mode of the Timer R
1 Sets the module stop mode of the Timer R
Rev. 2.0, 11/00, page 344 of 1037
MSTPCRH
6 5 4 3 2
MSTP14 MSTP13 MSTP12 MSTP11 MSTP10
1 1 1 1 1
R/W R/W R/W R/W R/W
1 0 7 6 5
MSTP9 MSTP8 MSTP7 MSTP6 MSTP5
1 1 1 1 1
R/W R/W R/W R/W R/W
MSTPCRL
4 3 2 1
MSTP4 MSTP3 MSTP2 MSTP1 MSTP0
1 1 1 1
R/W R/W R/W R/W R/W
(Initial value)
0
1