Module Stop Control Register (Mstpcr) - Renesas Hitachi H8S/2194 Series Hardware Manual

19.2.4

Module Stop Control Register (MSTPCR)

7
Bit :
MSTP15
Initial value :
1
R/W : R/W
The MSTPCR consists of two 8-bit readable/writable registers that control module stop mode.
When MSTP4 bit is set to 1, the 8-bit PWM stops its operation upon completion of the bus cycle
and transits to the module stop mode. For details, see section 4.5, Module Stop Mode.
The MSTPCR is initialized to H'FFFF by a reset.
Bit 4: Module Stop (MSTP4)
This bit sets the module stop mode of the 8-bit PWM.
MSTPCRL
Bit 4
MSTP4 Description
0 8-bit PWM module stop mode is released
1 8-bit PWM module stop mode is set
Rev. 2.0, 11/00, page 410 of 1037
MSTPCRH
6 5 4 3
MSTP14 MSTP13 MSTP12 MSTP11 MSTP10
1 1 1 1
R/W R/W R/W R/W R/W
2 1 0 7 6
MSTP9 MSTP8 MSTP7 MSTP6
1 1 1 1 1
R/W R/W R/W R/W
MSTPCRL
5 4 3 2 1
MSTP5 MSTP4 MSTP3 MSTP2 MSTP1
1 1 1 1 1
R/W R/W R/W R/W R/W
(Initial value)
0
MSTP0
1
R/W