Renesas Hitachi H8S/2194 Series Hardware Manual page 162

Bit 0: Program Setup (PSU)
Prepares for a transition to program mode. Set this bit to 1 before setting the P bit to 1 in
FLMCR1. Do not set the SWE, ESU, EV, PV, E, or P bit at the same time.
Bit 0
PSU Description
0 Program setup cleared
1 Program setup
[Setting condition] When FWE = 1, and SWE = 1
(Initial value)
Rev. 2.0, 11/00, page 135 of 1037