Table Of Instructions Classified By Function - Renesas Hitachi H8S/2194 Series Hardware Manual

2.6.3

Table of Instructions Classified by Function

Table 2.3 to 2.10 summarize the instructions in each functional category. The notation used in
table 2.3 is defined below.
Operation Notation
Rd
Rs
Rn
ERn
(EAd)
(EAs)
EXR
CCR
N
Z
V
C
PC
SP
#IMM
Disp
+
−
×
÷
∧
∨
⊕
→
∼
:8/:16/:24/:32
Note: General registers include 8-bit registers (R0H to R7H, R0L to R7L), 16-bit registers
*
(R0 to R7, E0 to E7), and 32-bit registers (ER0 to ER7).
General register (destination)*
General register (source)*
General register*
General register (32-bit register)
Destination operand
Source operand
Extended control register
Condition-code register
N (negative) flag in CCR
Z (zero) flag in CCR
V (overflow) flag in CCR
C (carry) flag in CCR
Program counter
Stack pointer
Immediate data
Displacement
Addition
Subtraction
Multiplication
Division
Logical AND
Logical OR
Logical exclusive OR
Move
NOT (logical complement)
8-, 16-, 24-, or 32-bit length
Rev. 2.0, 11/00, page 33 of 1037