Module Stop Control Register (Mstpcr) - Renesas Hitachi H8S/2194 Series Hardware Manual

21.2.3

Module Stop Control Register (MSTPCR)

7
Bit :
MSTP15
Initial value :
1
R/W
R/W :
The module stop control register (MSTPCR) consists of two 8-bit readable/writable registers that
control the module stop mode functions.
When the MSTP5 bit is set to 1, the 14-bit PWM operation stops at the end of the bus cycle and
a transition is made to module stop mode. For details, see section 4.5, Module Stop Mode.
MSTPCR is initialized to H'FFFF by a reset.
Bit 5: Module Stop (MSTP5)
Specifies the module stop mode of the 14-bit PWM.
MSTPCRL
Bit 5
MSTP5 Description
0 14-bit PWM module stop mode is released
1 14-bit PWM module stop mode is set
Rev. 2.0, 11/00, page 428 of 1037
MSTPCRH
6 5 4 3 2
MSTP14 MSTP13 MSTP12 MSTP11 MSTP10
1 1 1 1 1
R/W R/W R/W R/W R/W
1 0 7 6 5
MSTP9 MSTP8 MSTP7 MSTP6 MSTP5
1 1 1 1 1
R/W R/W R/W R/W R/W
MSTPCRL
4 3 2 1
MSTP4 MSTP3 MSTP2 MSTP1 MSTP0
1 1 1 1
R/W R/W R/W R/W R/W
(Initial value)
0
1