Renesas Hitachi H8S/2194 Series Hardware Manual page 160

Bit 1: Erase (E)
Selects erase mode transition or clearing. Do not set the SWE, ESU, PSU, EV, PV, or P bit at
the same time.
Bit 1
E Description
0 Erase mode cleared
1 Transition to erase mode
[Setting condition] Setting is available when FWE = 1, SWE = 1, and ESU = 1 are
selected
Bit 0: Program (P)
Selects program mode transition or clearing. Do not set the SWE, PSU, ESU, EV, PV, or E bit
at the same time.
Bit 0
P Description
0 Program mode cleared
1 Transition to program mode
[Setting condition] Setting is available when FWE = 1, SWE = 1, and PSU = 1 are
selected
(Initial value)
(Initial value)
Rev. 2.0, 11/00, page 133 of 1037