Renesas Hitachi H8S/2194 Series Hardware Manual page 211

Bit 1: Erase 2 (E2)
Selects erase mode transition or clearing for addresses H'20000 to H'3FFFF. Do not set the
ESU2, PSU2, EV2, PV2, or P2 bit at the same time.
Bit 1
E2 Description
0 Erase mode cleared
1 Transition to erase mode
[Setting condition] When FWE = 1, SWE = 1, and ESU2 = 1
Bit 0: Program 2 (P2)
Selects program-mode transition or clearing for addresses H'20000 to H'3FFFF. Do not set the
ESU2, PSU2, EV2, PV2, or E2 bit at the same time.
Bit 0
P2 Description
0 Program-mode cleared
1 Transition to program-mode
[Setting condition] When FWE = 1, SWE = 1, and PSU2 = 1
Rev. 2.0, 11/00, page 184 of 1037
(Initial value)
(Initial value)