Linear Time Counter (Ltc); Reload/Compare Match Register (Rcr) - Renesas Hitachi H8S/2194 Series Hardware Manual

15.2.2

Linear Time Counter (LTC)

Bit :
LTC7
Initial value :
R/W :
The linear time counter (LTC) is a readable 8-bit up/down-counter. The inputting clock can be
selected by the LMR2 to LMR0 bits of the LMR.
When reset, the LTC is initialized to H'00.
15.2.3

Reload/Compare Match Register (RCR)

Bit :
RCR7
Initial value :
R/W :
The reload/compare match register (RCR) is an 8-bit write only register.
When the Timer L is being controlled to the up-counting function, when a compare match value
is set to the RCR, the LTC will be cleared at the same time and the LTC will then start counting
up from the initial value (H'00).
While, when the Timer L is being controlled to the down-counting function, when a reloading
value is set to the RCR, the same value will be loaded to the LTC at the same time and the LTC
will then start counting up from said value. Also, when the LTC underflows, the value of the
RCR will be reloaded to the LTC.
When reset, the RCR is initialized to H'00.
Rev. 2.0, 11/00, page 326 of 1037
7 6 5
LTC6 LTC5
0 0 0
R R R
7 6 5
RCR6 RCR5
0 0 0
W W W
4 3
LTC4 LTC3 LTC2
0 0
R R
4 3
RCR4 RCR3 RCR2
0 0
W W W
2 1 0
LTC1 LTC0
0 0 0
R R R
2 1 0
RCR1 RCR0
0 0 0
W W