Stack Status After Exception Handling - Renesas Hitachi H8S/2194 Series Hardware Manual

5.5

Stack Status after Exception Handling

Figure 5.4 shows the stack after completion of trap instruction exception handling and interrupt
exception handling.
Figure 5.4 (1) Stack Status after Exception Handling (Normal Mode)*
Note: * Normal mode is not available for this LSI.
Figure 5.4 (2) Stack Status after Exception Handling (Advanced Mode)
Rev. 2.0, 11/00, page 94 of 1037
SP
CCR
CCR *
PC
(16 bits)
Interrupt control modes 0 and 1
Note: * Ignored on return.
SP CCR
PC
(24 bits)
Interrupt control modes 0 and 1