Setting Conditions For Saving Measurement Images - Omron F250-UME Software Manual

Setting Conditions for Saving Measurement Images

5-5 Setting Conditions for Saving Measurement Images
Production line
Saved images
When only NG images
are set to be saved
When all images are
set to be saved
Precaution
SeeAlso
The Controller can save up to 35 measured images. These 35 images are
shared by 32 scenes. The condition for saving the images can be selected
from saving only when the measurement result is NG or saving all images
regardless of the measurement result. When 35 images have been stored,
new images will be stored by overwriting old images, starting with the oldest.
Previous 3
OK
Previous 3
Stored images will be cleared when the power is turned OFF. Images to be
kept must be backed up to a personal computer or Memory Card.
Refer to
1. Enter System mode and select Measurement control.
The Measurement Control Settings Screen will be displayed.
Measurement control
2. Change the conditions under Image storage.
3. Select End.
The settings will be recorded and the System Mode Screen will return.
Previous 2 Previous 1
NG NG
Previous 1 Latest
Previous 2 Previous 1
.
Image storage :
None
STEP in measure :
None
BUSY range :
Only NG
End
Section 5-5
Last
measurement
object
OK
Latest
All
5-(27)