Omron F250-UME Software Manual page 820

Customizing Operations
Display Capture Results
Captured display
OK 67ms
0.Scn 0 MON
1.Fine matching
Judge :OK
Quantity : 0
Area : 0
Gravity X : 0.000
Gravity Y : 0.000
Image 0 freeze
5-(22)
When display capture is executed, a directory called IMAGE will automatically
be created in the root directory of the Memory Card and the following two
types of files will be stored in that directory.
LIVE***.BMP
CAPT***.BMP
0.Scn 0 MON
1.Fine matching
Judge :OK
Quantity : 0
Area : 0
Gravity X : 0.000
Gravity Y : 0.000
A serial number starting from 000 will be automatically allocated to ***.
The same number is used for both files.
Density images with 256 gradations will be
saved in bitmap format. These images can
be loaded to the Controller and re-
measured. (Binary images will also be
saved in density images.)
However, LIVE***.BMP files will not be
saved in the following circumstances. Only
CAPT***.BMP files will be saved
- When display capture is executed in Set,
System, or Tool Modes.
- When Image size is set to Reduced.
OK 67ms
The displayed image will be saved in a bitmap.
(The image will only have 192 gradations.)
Image 0 freeze
Section 5-4