Omron F250-UME Software Manual page 214

Circle Position Compensation
STEP 2: Registering Models
2-9-(11)
Register four points on the circumference and the rotation positioning model.
1. Select Model registration.
Position(1 model)
The Model Registration Screen will be displayed.
Model registration
2. Specify the center position of the circle.
Up/Down/Left/Right Keys: Move the cursor.
3. Press the ENT Key.
The screen for setting the radius will be displayed.
Model registration
4. Specify the size of the circle.
Left Key: Decreases the size.
Right Key: Increases the size.
5. Press the ENT Key.
Measurement conditions
Model registration
Search Region
A
Judgement conditions
Clear
A
A
Section 2-9
255,241
70