Omron F250-UME Software Manual page 758

Changing Scenes and Scene Groups
Using Scene Group Function
CHECK
4-(4)
Always mount the Memory Card for storing scene group data into slot 1. If
scene groups 1 to 31 are switched to, a directory called DEFSCNGR will be
automatically created in the root directory of the Memory Card. The scene
group data will be stored in that directory in files called SGR_00**.SGR (where
** is the scene group number).
1. Insert a Memory Card.
0.Scn 0
2. Display the Basic Screen for Monitor Mode or Run Mode.
3. Move the cursor to Scn and press the ENT Key.
The Scn 0 to Scn 7 options will be displayed.
0.Scn 0
S+ESC:Edit S+ENT:Scn Group
4. Press the SHIFT+ENT Keys.
The Scene Group 0 to Scene Group 7 options will be displayed.
Use the Down Key to display scene group numbers 8 to 31.
Scn Group select
S+ESC:Edit
5. Move the cursor to the scene group number to be switched to and press
the ENT Key.
The selected scene group will be displayed.
MON
Image 0 freeze
MON
0.Scn 0
1.Scn 1
2.Scn 2
3.Scn 3
4.Scn 4
5.Scn 5
6.Scn 6
7.Scn 7
↑ ↓
Image 0 freeze
0.Scn Group 0
1.Scn Group 1
2.Scn Group 2
3.Scn Group 3
4.Scn Group 4
5.Scn Group 5
6.Scn Group 6
7.Scn Group 7
↑ ↓
Section 4-1
---- ---ms
---- ---ms