Omron F250-UME Software Manual page 885

Normal Serial Interface
Data
The following settings data is for gravity and area and gravity and axis measurement.
Settings 32 Region 0
data
33
34
35
36
37
38
39
40
41
42
The following settings data is for gravity and area measurement.
43 Region 0
The following settings data is for gravity and axis measurement.
44 Region 0
45
The following settings data is for processing item region and reference position mea-
surement.
Settings 46 Region 0
data
47
48
49
50
51
The following settings data is for gravity and area and gravity and axis measurement.
Settings 52 Region 1
data
53
54
55
56
57
58
59
60
61
62
The following settings data is for gravity and area measurement.
63 Region 1
Details
Binary level upper limit (0 to 255)
Binary level lower limit (0 to 255)
Reverse binary level
0: Not reversed
1: Reversed
X upper limit (-9,999.999 to 9,999.999)
X lower limit (-9,999.999 to 9,999.999)
Y upper limit (-9,999.999 to 9,999.999)
Y lower limit (-9,999.999 to 9,999.999)
Area upper limit (0.000 to 9,999,999.999)
Area lower limit (0.000 to 9,999,999.999)
Skipping X (1 to 15)
Skipping Y (1 to 15)
Fill profile
0: OFF
1: ON
Axis angle upper limit (-180.000 to 180.000)
Axis angle lower limit (-180.000 to 180.000)
Region upper left X (0 to 511) (See note 2.)
Region upper left Y (0 to 483) (See note 2.)
Region lower right X (0 to 511) (See note 2.)
Region lower right Y (0 to483) (See note 2.)
Reference position X (0 to 511)
Reference position Y (0 to 483)
Binary level upper limit (0 to 255)
Binary level lower limit (0 to 255)
Reverse binary level
0: Not reversed
1: Reversed
X upper limit (-9,999.999 to 9,999.999)
X lower limit (-9,999.999 to 9,999.999)
Y upper limit (-9,999.999 to 9,999.999)
Y lower limit (-9,999.999 to 9,999.999)
Area upper limit (0.000 to 9,999,999.999)
Area lower limit (0.000 to 9,999,999.999)
Skipping X (1 to 15)
Skipping Y (1 to 15)
Fill profile
0: OFF
1: ON
Section 6-2
6-2-(35)