Omron F250-UME Software Manual page 198

Model Position Compensation
2-8-3 Setting Displacement Direction
Measurement Objects Not On An Angle (Example: When Only Region 0 Is Set)
Measurement Objects On An Angle (Example: When Only Region 0 Is Set)
For Precision Position Compensation Using Measurement Object Angles (Example: When
Region 0 and Region 1 Are Set)
2-8-(10)
The direction function is used to select which region's measurement results
will be used as the basis for position displacement compensation in the X, Y,
and (rotation) directions
1. Select Direction.
1.Model pos. comp
The Direction Settings Screen will be displayed.
Direction
Direction X
Direction Y
Direction
Direction X
Direction Y
Direction
Direction X
Direction Y
Direction
Measurement conditions
Positions compensation 0
Positions compensation 1
Direction
Detailed conditions
Direction X : Region 0
Direction Y : Region 0
Direction : None
End
Section 2-8
: Region 0
: Region 0
: None
End
: Region 0
: Region 0
: Region 0
End
: Midpoint
: Midpoint
: Relative angle
End