Omron F250-UME Software Manual page 801

Camera Settings
5-2 Camera Settings
Note The asterisk (*) indicates the default setting.
SeeAlso
Specify the model of the connected Camera and Intelligent Lighting (if using
any). The model is written on each unit.
Menu item
Camera
Intelligent Lighting 0
Intelligent Lighting 1
Intelligent Lighting 2
Intelligent Lighting 3
1. Enter System Mode and select Camera settings.
Refer to
The Camera Settings Screen will be displayed.
Camera settings
2. Select the model of the connected Camera.
3. If using Intelligent Lighting, select the model.
Models
F150-S1A Select the model of the connected Camera.
F160-S1*
Others
Out of use* If a Camera with Intelligent Lighting is con-
nected, select the model of the Intelligent
LTC20
Lighting.
LTC50
Always set the DIP switch on the Intelligent
Lighting to 0, regardless of the Camera
number.
Refer to the Setup Manual.
.
Camera :F160-S1
Intelligent Lighting 0:
Out of use
Intelligent Lighting 1:
Out of use
Intelligent Lighting 2:
Out of use
Intelligent Lighting 3:
Out of use
End
Section 5-2
Details
5-(3)