Initializing Measurement Conditions: Clearing Scenes - Omron F250-UME Software Manual

Changing Scenes and Scene Groups
4-1-3

Initializing Measurement Conditions: Clearing Scenes

SeeAlso
4-(6)
Use the following procedure to clear measurement conditions set in Set Mode,
and to return scenes to their default settings. This section explains the proce-
dure performed separately for each scene.
Refer to
whole scene groups.
1. Move the cursor to Scn and press the ENT Key.
0.Scn 0
S+ESC:Edit S+ENT:Scn Group
2. Move the cursor to the number of the scene to be cleared.
3. Press the SHIFT+ESC Keys.
The Copy/Clear/Comment Menu will be displayed.
4. Select Clear.
A confirmation message will be displayed.
5. Select Execute.
The scene will be cleared.
MON
0.Scn 0
1.Scn 1
2.Scn 2
3.Scn 3
4.Scn 4
5.Scn 5
6.Scn 6
7.Scn 7
↑ ↓
Image 0 freeze
Copy
Clear
Comment
This scene data
will be cleared
Execute Cancel
Section 4-1
for information on initializing
---- ---ms