Table of Contents
Advertisement
EC Positioning
2-16-(11)
Inputting Figures
1.
Select Radius.
Region0(Circle)
The registration selections will be displayed.
2.
Select Input figure.
The screen for drawing figures will be displayed.
Input figure
3.
Specify the center position of the circle.
Up/Down/Left/Right Keys: Move the cursor.
ENT Key:
The screen for setting the radius will be displayed.
Input figure
4.
Specify the radius (3 to 512 pixels).
Up/Right Keys:
Down/Left Keys:
ENT Key:
Measurement conditions
Search region
Radius
Reference registration
Judgement conditions
Clear
Input figure
Input parameter
Confirms the setting.
Larger
Smaller
Confirms the setting.
Section 2-16
251,365
100
Advertisement
Chapters
Table of Contents
