Display Item - Omron F250-UME Software Manual

Display Item

2-46 Display Item
CHECK
CHECK
Operational Flow
Selecting Display Items
2-46-(1)
The Display Item processing item is used to display the name of one process-
ing item set to the current scene on the screen in Run and Monitor Modes.
If comments are entered for the processing item, the comment will also be dis-
played.
Example: Displaying Names in Combination with Display String and Display
Measure
Measurement details
0.Scn 0 RUN
Difference from reference: 20
Pattern
Processing item name
The name of one processing item set to the current scene is displayed on the
screen in Run and Monitor Modes. If a comment is entered for the processing
item, the comment will also be displayed.
The data set here will be enabled when None or Positions is selected under
System/Display/Display settings/Display results.
Even when the display image is set to be displayed as a reduced image, the
characters will always be displayed in the specified position.
1
Select
display items.
Select the processing item names to be displayed.
1. Select Display item.
0.Scn 0=SET=
0.Camera image
1.Binary pos. comp
2.Edge position
3.Calculation
4.Display item
5.
ENT:Set SFT+ESC:Edit
OK 45ms
Measurement value
Image 0 freeze
2 3
Set display Set display
conditions. position.
Section 2-46