Omron F250-UME Software Manual page 634

Calculation
2-29-(12)
Measurement item
Judgement @ R JG
Search position @ R X
Search position @ R Y
Search angle @ R TH
Reference position @ R SX
Reference position @ R SY
Axis reference @ R ST
Radius @ R R
Circular value @ R CV
Line length @ R L1
Line length @ R L2
Apex @ R PX1
Apex @ R PY1
Apex @ R PX2
Apex @ R PY2
Apex @ R PX3
Apex @ R PY3
Apex @ R PX4
Apex @ R PY4
: Region number (0 or 1)
@
: Region number (00 or 01)
Details
For region @ Judgement result
X coordinate for where mark found.
Y coordinate for where mark found.
Angle where mark found.
X coordinate for reference position
Y coordinate for reference position
Reference angle (cross point, box, multi-
ple cross points)
Radius of measured circle (for circles)
Evaluation results for measured circle
(for circles)
Length of measured edge 1 (for cross
points and multiple cross points)
Length of measured edge 2 (for cross
points and multiple cross points)
X coordinate of measured upper left cor-
ner (for boxes)
Y coordinate of measured upper left cor-
ner (for boxes)
X coordinate of measured lower left cor-
ner (for boxes)
Y coordinate of measured lower left cor-
ner (for boxes)
X coordinate of measured upper right
corner (for boxes)
Y coordinate of measured upper right
corner (for boxes)
X coordinate of measured lower right
corner (for boxes)
Y coordinate of measured lower right
corner (for boxes)
Section 2-29