Omron F250-UME Software Manual page 647

Calculation
Example 2: Calculation Using Judgement Results for Unit 0 and Unit 1
Calculation0.
U0.JG+U1.JG
Measurement :
Upper : [
Lower : [
ENT:Change
Calculations Using Other Expression Values
The expression values set in a calculation unit can be used for other calcula-
tions. The calculation result for the expression being used will be D00 to D07
and the judgement result for the expression will be J01 to J07.
Example for the Following Scene Settings
ENT:Set SFT+ESC:Edit
Example 1: Finding the reference position distance and measurement result
distance using pattern inspection and outputting the difference
Region 0 for unit 1
0.000
0.000]
If set to "0.000", the following
0.000] evaluations will occur:
If both OK: Measurement value 0.000
and judgement OK.
If either one is NG: Measurement
value is
If both are NG: Measurement value is
-
2.000 and judgement is NG.
0.Scn 0=SET=
0.Camera image
1.Pattern
2.Pattern
3.Calculation
4.
Section 2-29
-
1.000 and judgement is NG.
Region 0 for unit 2
2-29-(25)