Omron F250-UME Software Manual page 923

Normal Serial Interface
Note If these settings are changed, one rectangular region will be set and any previ-
EC Circle Count (Settings Data)
Data
Settings 270 Measurement image
data
0: Image 0
1: Image 1
271 Coordinate mode
0: After scroll, calibration OFF
1: Before scroll, calibration OFF
2: After scroll, calibration ON
3: Before scroll, calibration ON
272 Edge extraction mask size
0: 3
1: 5
273 Edge extraction lower limit (10 to 255)
274 Edge extraction upper limit (10 to 255)
275 Inspected region upper left X (0 to 511) (See note.)
276 Inspected region upper left Y (0 to 483) (See note.)
277 Inspected region lower right X (0 to 511) (See note.)
278 Inspected region lower right Y (0 to 483) (See note.)
279 Circle color
0: Black
1: White
2: Both
280 Circle center X coordinate (0 to 511)
281 Circle center Y coordinate (0 to 483)
282 Circumference radius (3 to 512)
283 Circumference width (1 to 64)
284 Quantity upper limit (0 to 64)
285 Quantity lower limit (0 to 64)
286 Skipping
0: OFF
1: ON
287 Circular value (0 to 100)
288 Radius upper limit (1 to 9,999.999)
289 Radius lower limit (1 to 9,999.999)
ously drawn figures will be deleted.
Details
™
3
™
5
Section 6-2
6-2-(73)