Omron F250-UME Software Manual page 625

Calculation
2-29-2 Setting Expressions
Calculation0.
U2.R00X-U2.R01X
Measurement :
Upper :
Lower :
ENT:Change
CHECK
SeeAlso
CHECK
SeeAlso
Up to 8 expressions (0 to 7) can be set for one unit.
578908.965
[ 600000.000]
[ 550000.000]
The calculation result is not output to an external device. Select the result out-
put processing items for results output if the calculation result needs to be out-
put to an external device.
Refer to
, and
The calculation results can be set to be reflected in the overall result.
Refer to page 2-29-(2).
1. Select Calculation.
ENT:Set SFT+ESC:Edit
The list of calculation settings will be displayed.
4.Calculation
Calculation number
Calculation 0 to 7
Expression
Measurement result for the set expression
Refer to this when setting judgement conditions.
Judgement conditions
Set the judgement conditions for the expression.
-
Set the OK range ( 9999999.999 to 9999999.999).
,
.
0.Scn 0=SET=
0.Camera image
1.Binary pos. comp
2.Edge position
3.Edge position
4.Calculation
5.
Conditions
0 .
1 .
2 .
3 .
4 .
5 .
6 .
7 .
SFT+ESC:Edit
Section 2-29
, ,
2-29-(3)