Table of Contents
Advertisement
Pattern
2-20-1
Changing Measurement Conditions
Accuracy
2-20-(3)
Change the settings for searches common to all measurement regions.
Change these conditions for high-precision model position detection. Nor-
mally, these conditions can be left on the default settings. After changing the
settings, perform an object measurement to check that measurement can still
be performed correctly.
Select the degree of precision when searching for model positions.
Accuracy setting
Normal*
Finds the position in pixel units.
Precise
Finds the position in sub-pixel units.
The measurement is performed with greater precision than the
normal search, but processing time is longer.
The asterisk (*) indicates the default setting.
1.
Select Pattern.
ENT:Set SFT+ESC:Edit
The selects for pattern inspections will be displayed.
1.Pattern
2.
Select Measurement conditions.
The Measurement Conditions Settings Screen will be displayed.
Measurement conditions
3.
Change the accuracy setting.
4.
Select End.
The settings will be registered and the screen in (1.) will return.
0.Scn 0=SET=
0.Camera image
1.Pattern
2.
Measurement conditions
Select region
Detailed conditions
Coordinate mode
Accuracy : Normal
End
Section 2-20
Details
Advertisement
Chapters
Table of Contents
