Omron F250-UME Software Manual page 38

Basic Operations
1-6-1-1 Camera Settings
Shutter Speed
For F150-S1A Cameras
Object movement
Slow
Fast
(Default setting: 1/2000 s)
1-(30)
The items that can be set under Camera Image can be broadly classified into
three groups:
• The shutter speed and other conditions relating to when the image is cap-
tured (camera settings).
• Selection of which camera image will be measured (camera selection).
• Settings to make the image easier to measure (filtering).
Camera Image
Camera
settings
Image buffer
Camera
(for Camera 0)
0
Image buffer
Camera
(for Camera 1)
1
Image buffer
Camera
(for Camera 2)
2
Image buffer
Camera
(for Camera 3)
3
The Controller has two image memories. Two images, Image 0 and Image 1,
are stored for the camera image selected under Select Camera. Both images
are for the same Camera but different filtering can be applied to each of the
images.
Some processing items require selection of either Image 0 or Image 1 for
object measurement and other processing items measure only Image 0. Refer
to the explanations for each item for details.
In this section where the example of Fine Matching is used, measurements will
be performed on Image 0.
Change the shutter speed when the object is moving quickly, causing the
image to be blurred.
The shutter speed can be changed from the menu for F150-S1A and F160-S1
Cameras only.
Shutter speed
1/100 s
1/500 s
1/2000 s
1/10000 s
Camera
selection
* Only one camera can be selected.
For F160-S1 Cameras
Object movement
Slow
Fast
Section 1-6
Filtering
Image 0
0
Filtering
Image 1
1
Shutter speed
1/120 s
1/200 s
1/500 s
1/1000 s
1/2000 s
1/4000 s
1/8000 s
1/20000 s
(Default setting: 1/2000 s)