Table of Contents
Advertisement
Edge Pitch
2-27-6
Setting the Coordinate Mode
Coordinate mode
Calibration : OFF
End
The asterisk (*) indicates the default setting.
CHECK
2-27-(8)
Select the type of coordinates.
ON:
OFF*:
If the coordinate mode is changed after the judgement conditions have been
set, the measurement results will change also. Change the judgement condi-
tions to enable correct measurement.
1.
Select Coordinate mode.
0.Edge pitch
The Coordinate Mode Settings Screen will be displayed.
Coordinate mode
2.
Make the settings for each item.
3.
Select End.
The settings will be registered and the screen in (1.) will return.
Output made using coordinate values
set using calibration.
Output made using Camera coordinate values.
Measurement conditions
Region
Judgement conditions
Detailed conditions
Coordinate mode
Calibration : OFF
End
Section 2-27
Advertisement
Chapters
Table of Contents
