Omron F250-UME Software Manual page 418

EC Positioning
Clearing Set Regions
2-16-(35)
The Controller will search for the cross point in the displayed image that
matches the conditions and a display cursor will appear at that position.
Reference registration
ENT:Set
2. Press the Up/Down and Right/Left Keys to move the cursor to change the
position.
3. Press the ENT Key to save the setting.
The setting will be registered and the screen in (1.) will return.
The clear operation is executed for each region.
1. Select the region number to be cleared.
Select region
The selections will be displayed.
2. Select Clear.
A confirmation message will be displayed.
3. Select Execute.
The region will be cleared and the screen in (1.) will return.
Search region
Reference position
:Move
Region0
Region1
Region2
Region3
Region4
Region5
Region6
Region7
Example: For circles
Measurement conditions
Search region
Radius
Reference registration
Judgement conditions
Clear
Region will be cleared.
Execute Cancel
Section 2-16
248,152