Omron F250-UME Software Manual page 417

EC Positioning
STEP 4: Registering Reference Positions
SeeAlso
1. Select Search region.
Region0(Multi-points)
The screen for drawing search regions will be displayed.
Search region
2. Draw a rectangular search region.
Specify the upper left and lower right coordinates.
Up/Down/Left/Right Keys: Move the cursor.
ENT Key:
When the bottom right coordinates have been set, the screen in (1.) will re-
turn.
Register reference positions here to detect position displacement. Positions
can be inspected if the difference between the reference position and the mea-
surement position is obtained from a calculation.
Refer to
1. Select Reference registration.
Region0(Multi-points)
Measurement conditions
Line conditions
Search region
Reference registration
Clear
Confirms the settings.
for an outline.
Measurement conditions
Line conditions
Search region
Reference registration
Clear
Section 2-16
391,436
2-16-(34)