Omron F250-UME Software Manual page 42

Basic Operations
Adjustment Method 2: Adjusting Light Levels by Segment
1-(34)
The light level for each segment can be set separately to a value between 0
and 7. The setting "0" represents the unlit state, and the higher the setting
value the higher the light level. Light levels can also be set by adjusting the
light levels for the segments separately after selecting a sample lighting pat-
tern.
Use the Left and Right Keys to select the segment to be adjusted and use the
Up and Down Keys to adjust the light level.
F150-LTC20, F160-LTC20
F150-LTC50, F160-LTC50
1. Select Camera settings.
0.Camera image
The initial Camera Settings Screen will be displayed.
Camera settings
2. Select Light control for the Camera number being used.
Camera settings
Select camera
Filtering order(Image0)
Filtering(Image0)
BGS levels(Image0)
Filtering order(Image1)
Filtering(Image1)
BGS levels(Image1)
Frame/Field
Shutter speed(Cam0)
Light control(Cam0)
Calibration(Cam0)
Shutter speed(Cam1)
Light control(Cam1)
Calibration(Cam1)
Shutter speed(Cam2)
Light control(Cam2)
Section 1-6