Clearing Measurement Values - Omron F250-UME Software Manual

Clearing Measurement Values

4-3 Clearing Measurement Values
4-(24)
All the measurement values for the scene currently displayed can be cleared.
This function is useful, for example, for clearing the measurement count when
setting an expression to count the number of measurements.
1. Display the Basic Screen for Monitor Mode or Run Mode.
0.Scn 0
2. Move the cursor to MON (or RUN) and press the ENT Key.
The mode selections will be displayed.
0.Scn 0
3. Select TOOL.
The tool selections will be displayed.
TOOL
4. Select Clear measurement.
A confirmation message will be displayed.
5. Select Execute.
The measurement values will be cleared and the screen in (3.) will return.
MON
Image 0 freeze
MON
SET
MON
RUN
SYS
TOOL
SAVE
System data
Scn Group data
Scene data
System + Scn Group
Image data
Memory card
Clear images
Clear measurement
All measurements
will be cleared.
Execute Cancel
Section 4-3
---- ---ms
---- ---ms