Backing Up Flash Memory Data To A Memory Card - Omron F250-UME Software Manual

Backing Up Data
4-2-4

Backing Up Flash Memory Data to a Memory Card

Data saved to flash memory can be backed up to a Memory Card. This func-
tion enables saving both the installed processing items and settings data
(including system data and scene data for scene group 0) on a Memory Card.
This function is also useful for copying the same settings to a different Control-
ler when more than one Controller is being used.
It is recommended that data is backed up in case data is lost or the Controller
malfunctions.
1. Display the Basic Screen for Monitor Mode or Run Mode.
0.Scn 0
2. Move the cursor to MON (or RUN) and press the ENT Key.
The mode selections will be displayed.
0.Scn 0
3. Select TOOL.
The tool selections will be displayed.
TOOL
4. Select Back up Flash memory.
A confirmation screen will be displayed.
MON
Image 0 freeze
MON
SET
MON
RUN
SYS
TOOL
SAVE
System + Scn Group
Image data
Memory card
Clear images
Clear measurement
Line brightness
I/O monitor
Back up Flash memory
Back up Flash memory
to Memory card.
Drive : C1
Execute Cancel
Section 4-2
---- ---ms
---- ---ms
4-(21)