Omron F250-UME Software Manual page 877

Normal Serial Interface
CHECK
6-2-2-30 SYSSAVEM: System Save Memory Card
Function
6-2-2-31 UNITDATA
Function 1
SeeAlso
The XMODEM (-1K) protocol is not supported.
Example
This example saves the system data to the external device.
Input SYSSAVE Delimiter
Output OK Delimiter
Saves system data to a Memory Card.
Input
SYSSAVEM <file name> Delimiter
• Specify the drive (C0 or C1) at the beginning of the file name.
• Specify the absolute path from the root directory.
• Add the filename extension .SYD to the filename.
Output
Command executed correctly:
Command not executed correctly:
Example
This example saves the system data as the file "SYSDAT1.SYD" in Memory
Card 0 directory DIR01.
Input SYSSAVEM /C0/DIR01/SYSDAT1.SYD Delimiter
Output OK Delimiter
Reads settings parameters and measurement values for the unit set to the
current scene.
Input
UNITDATA <unit number> <data> Delimiter
• Specify a unit number between 0 and 9,999.
• The data will depend on the processing item for the specified unit.
Refer to the tables later in this section for a list of data.
Output
Command executed correctly:
Command not executed correctly:
Example
This example reads the judgement results for pattern inspection.
Input UNITDATA 5 0 Delimiter
Output 0 Delimiter
OK Delimiter
OK Delimiter
ER Delimiter
Value Delimiter
OK Delimiter
ER Delimiter
Section 6-2
6-2-(27)