Omron F250-UME Software Manual page 526

Rotation Positioning
2-22-5 Measurement Screens
SeeAlso
CHECK
Judgement Result
2-22-(21)
Detailed measurement values can be displayed on the screen in Monitor and
Run modes. These values are useful when adjusting measurement conditions.
This section describes what kind of information can be displayed for rotation
positioning.
Refer to
Run modes.
Press the SHIFT+ESC Keys on the Run Screen to access the following screen
and change Display results to Details.
0.Scn 0
Use the Up or Down Key to change to the unit for which rotation positioning is
set and the following detailed screens will be displayed.
Use the SHIFT+Right or Left Keys to switch in order between the three
screens.
0.Scn 0 RUN
1.Rotate position
Judge : NG
0
A
Region number
RUN NG
Image status
:
Freeze(Before scroll)
Display image :Image0
Image size
: All
Display results
: Details
End
Image 0 Freeze
NG 45ms
Judgement result for this unit
Position at or above candidate level.
Displayed only when search verification
set to ON.
Inspection region displayed in OK color
for OK result and displayed in NG color
for NG result.
(Figures drawn in OR mode are displayed
in solid lines and figures drawn in NOT
mode are displayed in dotted lines.)
Search coordinates
Section 2-22
for details on Monitor and
67ms