Omron F250-UME Software Manual page 611

Edge Pitch
2-27-3 Drawing Measurement Regions
CHECK
Measurement
region
CHECK
Draw a region to include all the edges to be detected.
Edges are detected in the direction of the long side of the measurement
region.
Correct
5 edges
Detection
direction
1. Select Region.
The Region Settings Screen will be displayed.
Region
2. Draw a box-shaped measurement region.
The only figure that can be drawn is a box.
When the bottom right coordinates have been set, the screen in (1.) will re-
turn.
Incorrect
Detection
direction
0 edges
Measurement image
Measurement conditions
Region
Judgement conditions
Detailed conditions
Coordinate mode
Section 2-27
Measurement
region
450,373
2-27-(5)