Omron F250-UME Software Manual page 81

Inputting Camera Images
• When the magnifications are the same for the X and the Y directions,
make sample measurements in 2 places only.
• When the magnifications in the X and Y directions are different, perform
sampling measurement in 3 places.
1. Select Camera settings.
0.Camera image
The initial Camera Settings Screen will be displayed.
2. Select Calibration.
+
+ +
Camera settings
Select camera
Filtering order(Image0)
Filtering(Image0)
BGS levels(Image0)
Filtering order(Image1)
Filtering(Image1)
BGS levels(Image1)
Frame/Field
Camera settings
Shutter speed(Cam0)
Light control(Cam0)
Calibration(Cam0)
Shutter speed(Cam1)
Light control(Cam1)
Calibration(Cam1)
Shutter speed(Cam2)
Light control(Cam2)
Section 2-1
2-1-(8)