Omron F250-UME Software Manual page 864

Normal Serial Interface
Function 2
CHECK
6-2-2-4 DISPCOND: Display Condition
Function 1
6-2-(14)
Sets the date and time.
Input
DATE <Month Day Hour Minute Year (first 2 digits) Year (last 2 digits). Sec-
onds> Delimiter
Input item
Month 01 to 12
Day 01 to 31
Hour 00 to 23
Minute 00 to 59
Year (first 2 digits) 19 or 20
Year (last 2 digits) 00 to 99
Second 00 to 59
Output
Command executed correctly:
Command not executed correctly:
Example
This example sets the time and date to 12:30:00 on August, 30 2000.
Input DATE 083012302000.00 Delimiter
Output OK Delimiter
Either all four digits of the year can be omitted or just the first two digits can be
omitted. The last two digits cannot be omitted without omitting the first two as
well.
Reads the current image display conditions.
Input
DISPCOND Delimiter
Output
Command executed correctly:
Command not executed correctly:
Condition code
0 Through
1 Freeze (before scroll)
2 Freeze (after scroll)
3 Last NG (before scroll)
4 Last NG (after scroll)
Example
This example shows the output response when the display image is in
"through."
Input DISPCOND Delimiter
Output 0 Delimiter
OK Delimiter
Range
---
---
---
---
All four digits can be omitted or just the
first two digits can be omitted.
These two digits can be omitted.
OK Delimiter
ER Delimiter
Condition code Delimiter
OK Delimiter
ER Delimiter
Meaning
Section 6-2
Remarks