Omron F250-UME Software Manual page 917

Normal Serial Interface
CHECK
Data
The following settings data is for box measurements.
Settings 543 Region 0
data
544
545
546
547
548
549
550
551
552
553
554
555
556
The following settings data is for multiple cross point measurements.
Settings 557 Region 0
data
558 Region 1
to
876 Region 7
to
928
Only the allocations for region 0 are listed here. Refer to the allocations for
region 0 to calculate the numbers for regions 1 to 7.
Details
Box color
0: Black
1: White
Result coordinate
0: Center 1: Upper left 2: Lower left
3: Upper right 4: Lower right
q
Defined side of
0: All 1: Upper 2: Lower 3: Left 4: Right
Long side (1 to 512)
Short side (1 to 484)
Long side lower limit (1 to 200)
Long side upper limit (1 to 200)
Short side lower limit (1 to 200)
Short side upper limit (1 to 200)
Long side distance lower limit (1 to 200)
Long side distance upper limit (1 to 200)
Short side distance lower limit (1 to 200)
Short side distance upper limit (1 to 200)
Line parallelism (1 to 99)
Sorting method
0: X ascending order
1: X descending order
2: Y ascending order
3: Y descending order
Search region upper left X (0 to 511)
... (Same as for region 0)
Search region upper left (0 to 511)
... (Same as for region 0)
Sorting method
0: X ascending order
1: X descending order
2: Y ascending order
3: Y descending order
Section 6-2
6-2-(67)