Density Defects - Omron F250-UME Software Manual

Density Defects

2-14 Density Defects
The Density Defect processing item is used to inspect measurement objects
using differences in density (brightness) in the measurement region.
This processing item is suitable for external inspections for defects or dirt on
unbuttoned measurement objects and defects or burrs on parts.
Example 1: Checking for Stains on Sheets
Defect found using density changes within measurement region.
Defect
Example 2: Inspecting for Defects or Burrs in O Rings
Measurement region
Section 2-14
2-14-(1)