Omron F250-UME Software Manual page 131

Binary Position Compensation
2-5-2-2 Position Compensation with Gravity and Axis
STEP 1: Setting the Binary Level
A confirmation message will be displayed.
2. Select Execute.
The settings will be cleared and the initial screen for binary position com-
pensation will be displayed.
1.Binary pos. comp
Density images taken by the Camera are converted into binary images made
up of black and white pixels and then measured. The size (area), position
(center of gravity), and axis angle of the white-pixel area is calculated.
1 2
Set the
Draw the
binary
region.
level.
Set the level for converting 256-gradation images into binary images. Mea-
surements are performed for the white pixels. Therefore, make the settings so
that the measurement object is white.
1. Select either Position compensation 0 or Position compensation 1.
1.Binary pos. comp
Region will be cleared.
Execute Cancel
Measurement image
Position compensation 0
Position compensation 1
Direction
(As required)
3
Re-register
the
reference
values.
Measurement image
Position compensation 0
Position compensation 1
Direction
Section 2-5
(As required)
4 5
Change
Set the
pixel
judgement
conditions.
skipping.
2-5-(12)