Omron F250-UME Software Manual page 194

Model Position Compensation
2-8-2-2 STEP 2: Setting the Search Region
2-8-2-3 STEP 3: Setting Judgement Conditions
CHECK
2-8-(6)
The Model Registration Screen will be displayed.
Model registration
3. Draw a box to show the region that the model can be registered.
The settings will be registered and the screen in (1.) will return.
Set the region in which the model is to be searched for.
1. Select Search region.
Position compensation 0
Model registration
Search region
Judgement conditions
Model reference
Clear
An arrow cursor will appear.
The model will be displayed in solid lines.
Search region
2. Draw a box-shaped search region.
The search region will be set and the screen in (1.) will return.
Set the judgement conditions for the correlation with the model and for the
position (X, Y) and angle where the object was detected.
Position Compensation Judgement Results and Scrolling
OK: Scroll will be performed.
Section 2-8
465,241
Model
500,356