Omron F250-UME Software Manual page 816

Customizing Operations
Function of Allocated Functions
5-(18)
Item
None Nothing allocated.
Measurement Displays the SYS/Conditions/Display settings screen.
display
Previous image Displays the previous memory image.
(See note 1.)
Next image (See Displays the next memory image.
note 1.)
Judge conditions Displays the screen for setting evaluation criteria.
Previous scene Displays the previous scene.
Next scene Displays the next scene.
Previous scene Displays the previous scene group.
group
Next scene group Displays the next scene group.
Clear image A message confirming whether all stored images are to be cleared
is displayed. Images stored in memory are cleared when power is
turned OFF. By allocating this function to a Console Key, stored
images can be cleared without turning power OFF.
Erase characters Displays the menu for character display settings.
To prevent scorching of the monitor screen, it is possible to delete
screen characters.
Save Displays a confirmation message for saving to flash memory or
Memory Card.
Through/Freeze Switches to Freeze (before scroll) display if currently on Through
(See note 1.) display.
Switches to Through display if currently on Freeze @/ Last NG dis-
play.
Measurement Displays the SYS/Measurement control screen.
control
Monitor Displays the SYS/Display/Monitor screen.
Designate colors Displays the SYS/Display/Designate colors screen.
Thumbnail (See The saved measurement images are displayed 4 at a time.
note 2.)
Drive status Displays the Tool/Memory card/Drive status screen.
Scene/mode The scene number and mode display shown at the top left corner
of the Basic Screen in Monitor and Run Modes is deleted. Press
the ENT Key to display the scene number and mode display tem-
porarily. Measurement cannot be performed, however, during this
display. Press the ESC Key to make the display disappear.
Line Brightness Displays the Tool/Line brightness screen. Line brightness cannot
be displayed, however, when Last NG is set for Image status or
Image size is set to Reduced.
Display capture Saves the displayed image to the Memory Card.
Refer to
Previous sub-dis- When results display is set to Detail, the display will switch to the
play previous Details Screen for the displayed unit. The unit number will
be switched when set to Results.
Next sub-display When results display is set to Detail, the display will switch to the
next Details Screen for the displayed unit. The unit number will be
switched when set to Results.
Clear measure- Clears all measurement values for the currently displayed scene.
ments
Switch nonstop These functions cannot be used with the F250-C50/C55.
(See note 3.)
Section 5-4
Function
.