Omron F250-UME Software Manual page 939

Normal Serial Interface
Note If these settings are changed, one rectangular region will be set and the previ-
Labeling (Settings Data)
Data
Settings 31 Measurement image
data
0: Image 0
1: Image 1
32 Coordinate mode
0: After scroll, calibration OFF
1: Before scroll, calibration OFF
2: After scroll, calibration ON
3: Before scroll, calibration ON
33 Measurement region Upper left X (0 to 511) (See note.)
34
35
36
37 Binary level
38
39
40 Area
41
42 Filling up holes
0: OFF
1: ON
43 Sort
0: Area descending 1: Area ascending
2: X gravity descending 3: X gravity ascending
4: Y gravity descending 5: Y gravity ascending
44 Outside trimming
0: OFF
1: ON
45 Label number (0 to 2,499)
46 Number of labels
47
48 Area
49
50 Gravity X
51
52 Gravity Y
53
ously drawn figures will be deleted.
Details
Upper left Y (0 to 483) (See note.)
Lower right X (0 to 511) (See note.)
Lower right Y (0 to 483) (See note.)
Upper limit (0 to 255)
Lower limit (0 to 255)
Reverse binary level
0: Not reversed
1: Reversed
Upper limit (0.000 to 9,999,999.999)
Lower limit (0.000 to 9,999,999.999)
Upper limit (0 to 2,500)
Lower limit (0 to 2,500)
Upper limit (0.000 to 9,999,999.999)
Lower limit (0.000 to 9,999,999.999)
Upper limit (-9,999.999 to 9,999.999)
Lower limit (-9,999.999 to 9,999.999)
Upper limit (-9,999.999 to 9,999.999)
Lower limit (-9,999.999 to 9,999.999)
Section 6-2
6-2-(89)