Omron F250-UME Software Manual page 863

Normal Serial Interface
6-2-2-1 CLRMEAS: Clear Measure
Function
6-2-2-2 DATASAVE
Function
Precaution
6-2-2-3 DATE
Function 1
Clears the measurement values for the current scene.
Input
CLRMEAS Delimiter
Output
Command executed correctly:
Command not executed correctly:
Saves the current scene group data and system data. (Data for scene group 0
is saved to flash memory, data for scene groups 1 to 31 is saved to the Mem-
ory Card, and the system data is saved to the Memory Card.)
Input
DATASAVE Delimiter
Output
Command executed correctly:
Command not executed correctly:
Do not turn OFF the Controller's power supply until a response has been
received.
Reads the current date and time.
Input
DATE Delimiter
Output
Command executed correctly:
Month Day Hour Minute Year. Second Delimiter
OK Delimiter
Command not executed correctly:
ER Delimiter
Example
This example returns the time and date at 12:30:00 on August, 30 2000.
Input DATE Delimiter
Output 083012302000.00 Delimiter
OK Delimiter
OK Delimiter
ER Delimiter
OK Delimiter
ER Delimiter
Section 6-2
6-2-(13)