Omron F250-UME Software Manual page 808

Screen Display and Monitor
Positions
CHECK
Results
CHECK
Details
5-(10)
Displays all the regions set to the unit that executed the measurement. Figures
drawing using OR are shown in solid lines and figures drawn using NOT are
shown in dash lines.
0.Scn 0
If the image size is set to All and the Camera image or Switch camera settings
in the image input-related processing items are set to 2 or more, use the Up
and Down Keys to switch between images.
Displays a list of judgement results for the set unit.
If the character size is set to Normal, 8 sets of results will be shown on one
screen. If the character size is set to Small, 32 sets of results will be shown on
one screen.
SHIFT + Right/Left Keys: Scroll through the unit numbers.
0.Scn 0
0.Camera image
1.EC pos. comp
2.Fine matching
3.Fine matching
4.Switch camera
5.EC pos. comp
6.Fine matching
7.Fine matching
If the image size is set to All and the Camera image or Switch camera settings
in the image input-related processing items are set to 2 or more, use the Up
and Down Keys to switch between images.
Displays detailed information for each unit. Use the Up and Down Keys to
switch between units. The displayed data differs depending on the processing
item and some processing items have multiple Details Screens.
Use the SHIFT + Left/Right Keys to switch between Details Screens.
Refer to the explanation for each processing item for information on the
respective Details Screens.
NG 67ms
MON
Image 0 freeze
NG 67ms
MON
OK
OK
NG
OK
OK
OK
OK
OK
Image 0 freeze
Section 5-3